This streak camera uses a new generation of streak tubes based on the 75-year night vision heritage of PHOTONIS.

The tube is built according to high quality standards and features:

• Picosecond time resolution
• High spatial resolution
• Integrated input slit (no need for a mechanical slit)
• High-gain internal microchannel intensifier
• Ruggedized for harsh environment

It can be built with different cathodes and matched with a spectrometer grating for optimal throughput:

Photocathode length (X): 8 mm

Spatial Resolution (dx):  50µm with 50% contrast at the center of the screen

Number of spatial resolution units in screen (X/dx):  150 points

Available Ranges (ΔT):  1 ns to 1 ms

Number of time-resolution units in screen (Nt):  275

Single-shot time resolution (δt):  δt = ΔT / Nt     * Limited to 3 ps

Readout type: CCD Digital camera

CCD chip size: 1024×1392 pixels; 7 mm x 9 mm

Digitizer: 12 bit

Coupling to streak tube: 1.8:1 Fiber optic taper

AXIS-QVM is an all-in-one system that is operated locally by connecting a monitor, a keyboard and a mouse.

It comes with an internal computer that controls the streak tube supplies, the sweep circuits, monitors voltage stability, performs different self tests and safety checks. It can also control other optional peripherals via the USB port (a laser system, for example).

All required software comes pre-installed on the system. It is used to:

• Control whole system and acquire images
• Control the laser system (optional)
• Plot lineouts along time axis or space axis
• save image in different formats

Remote control over Gigabit Ethernet :

• “Windows Remote Desktop”
• Web base GUI
• High level device servers (TANGO, OPC, etc…) are available.

Electrical input: Universal AC, 110-240V, 50-60 Hz

Certification: CE

Tests and Calibration: Before shipping, each system is tested on a femtosecond laser at the Advanced Laser Light Source.

Installation and Training: A qualified engineer is sent to your laboratory to install the system and train users.

Photocathode
S20, S25, and S1 cathodes are available

Blanking circuits
With the blanking option, streak tube is blocked during the time the signals sweeps back to its start position. This feature is required when the optical signal lasts longer than the sweep range.

This streak camera uses a P510 PHOTONIS streak tube built according to high quality standards and features:

• 10-50 picosecond time resolution
• High spatial resolution
• Wide slit (35mm x 5mm)
• Ruggedized for harsh environment

It can be built with different cathodes and matched with the experiment for optimal throughput:

Photocathode length (X): 35 mm

Photocathode effective width (Y): adjustable from 50 µm to 5 mm

Spatial Resolution (dx): 60µm or 30µm with 50% contrast at the center of the screen

Number of spatial resolution units in screen (X/dx):  500 0r 1000 points

Available Ranges (ΔT):  2 ns to 1 ms

Number of time-resolution units in screen (Nt):  600 in narrow slit mode

Single-shot time resolution (δt):  δt = ΔT / Nt     5 ps or 150 ps

Readout type: TE-Cooled CCD Digital camera

CCD chip size: 4096 x 4096 pixels

Digitizer: 16 bit

Coupling to streak tube: 1.4:1 Fiber optic taper

AXIS-NV is an all-in-one system that is operated locally by connecting a monitor, a keyboard and a mouse.

It comes with an internal computer that controls the streak tube supplies, the sweep circuits, monitors voltage stability, performs different self tests and safety checks. It can also control other optional peripherals via the USB port (a laser system, for example).

All required software comes pre-installed on the system. It is used to:

• Control whole system and acquire images
• Control the laser system (optional)
• Plot lineouts along time axis or space axis
• save image in different formats

Remote control over Gigabit Ethernet :

• “Windows Remote Desktop”
• Web base GUI
• High level device servers (TANGO, OPC, etc…) are available.

Electrical input: Universal AC, 110-240V, 50-60 Hz

Certification: CE

Tests and Calibration: Before shipping, each system is tested on a femtosecond laser at the Advanced Laser Light Source.

Installation and Training: A qualified engineer is sent to your laboratory to install the system and train users.

Blanking circuits
With the blanking option, streak tube is blocked during the time the signals sweeps back to its start position. This feature is required when the optical signal lasts longer than the sweep range.

Remote control over Optical Ethernet
to operate system via optical Ethernet 1 Gbs (1000 Base SX).

Custom Input optics
Custom designed optical setup that accommodate special needs.

Slow scan mode
Operation mode in which the sweep crosses the whole screen in 0.5 second. It is used to characterize spatial non-uniformity in the instrumental response by illuminating with a constant brightness light source.

24V supply
To power the whole system with a DC voltage between 23V and 28V.

This streak camera uses a P900 PHOTONIS streak tube built according to high quality standards and features:

• Picosecond time resolution
• High spatial resolution
• Integrated input slit (no need for a mechanical slit)
• Ruggedized for harsh environment

It can be built with different cathodes and matched with the experiment for optimal throughput:

Photocathode length (X): 10 mm

Spatial Resolution (dx):  40µm with 50% contrast at the center of the screen

Number of spatial resolution units in screen (X/dx):  250 points

Available Ranges (ΔT):  1 ns to 1 ms

Number of time-resolution units in screen (Nt):  400

Single-shot time resolution (δt):  δt = ΔT / Nt     * Limited to 4 ps

Readout type: TE-Cooled CMOS Digital camera

CCD chip size: 2048 x 2048 pixels (27 mm x 27mm)

Digitizer: 16 bit

Coupling to streak tube: 1.3:1 Fiber optic taper

AXIS-SV is an all-in-one system that is operated locally by connecting a monitor, a keyboard and a mouse.

It comes with an internal computer that controls the streak tube supplies, the sweep circuits, monitors voltage stability, performs different self tests and safety checks. It can also control other optional peripherals via the USB port (a laser system, for example).

All required software comes pre-installed on the system. It is used to:

• Control whole system and acquire images
• Control the laser system (optional)
• Plot lineouts along time axis or space axis
• save image in different formats

Remote control over Gigabit Ethernet :

• “Windows Remote Desktop”
• Web base GUI
• High level device servers (TANGO, OPC, etc…) are available.

Electrical input: Universal AC, 110-240V, 50-60 Hz

Certification: CE

Tests and Calibration: Before shipping, each system is tested on a femtosecond laser at the Advanced Laser Light Source.

Installation and Training: A qualified engineer is sent to your laboratory to install the system and train users.

Blanking circuits
With the blanking option, streak tube is blocked during the time the signals sweeps back to its start position. This feature is required when the optical signal lasts longer than the sweep range.

Remote control over Optical Ethernet
to operate system via optical Ethernet 1 Gbs (1000 Base SX).

Laser-triggered sweep unit for CPA lasers
Because of its 500 fs RMS jitter, this unit allows the analysis of ultrafast events at repetition rates up to 5 kHz while conserving the excellent spatial and temporal resolution of the AXIS streak camera. This is the ideal tools ultrafast spectroscopy with large dynamic range and high signal-to-noise ratio It requires about 100 µJ per laser pulse.

24V supply
To power the whole system with a DC voltage between 23V and 28V.

Spectrometer
spectrometer that fits special needs.

This streak camera uses a new generation of streak tubes based on the 75-year night vision heritage of PHOTONIS.

The tube is built according to high quality standards and features:

• Picosecond time resolution
• High spatial resolution
• Integrated input slit (no need for a mechanical slit)
• High-gain internal microchannel intensifier
• Ruggedized for harsh environment

It can be built with different cathodes and matched with a spectrometer grating for optimal throughput:

Photocathode length (X): 8 mm

Spatial Resolution (dx):  50µm with 50% contrast at the center of the screen

Number of spatial resolution units in screen (X/dx):  150 points

Available Ranges (ΔT): 1 ns to 1 ms

Number of time-resolution units in screen (Nt): 275

Single-shot time resolution (δt): δt = ΔT / Nt * Limited to 3 ps

Readout type: CCD Digital camera

CCD chip size: 1024×1392 pixels; 7 mm x 9 mm

Digitizer: 12 bit

Coupling to streak tube: 1.8:1 Fiber optic taper

AXIS-QV is operated from a USB link to a PC running Windows .

The instrument comes with a CD containing all required software to:

• Control whole system and acquire images
• Control the laser system (optional)
• Plot lineouts along time axis or space axis
• save image in different formats

Electrical input: Universal AC, 110-240V, 50-60 Hz

Certification: CE

Tests and Calibration: Before shipping, each system is tested on a femtosecond laser at the Advanced Laser Light Source.

Installation and Training: A qualified engineer is sent to your laboratory to install the system and train users.

Photocathode
S20, S25, and S1 cathodes are available

Blanking circuits
With the blanking option, streak tube is blocked during the time the signals sweeps back to its start position. This feature is required when the optical signal lasts longer than the sweep range.